Miscellanous accessory

Art. No.:

Description

419

Link chain, 1m long, with 10 S-hooks

423

Winch for drop deck semi trailer part no. 21

425

Fire extinguisher

426

Stop block, colour yellow

436

Tow-rod

445

4-chamber rear lights, without bumper

446

4-chamber rear lights, incl. bumper, polished aluminium

448

Standard tyres "Fulda-Ecocontrol"
wheel diameter (73mm) 2.87'', section width (20mm) 0.79'', fitting rim diameter (40mm) 1.57''

453

Wide tyres "Fulda-Multitonn 2"
wheel diameter (73mm) 2.87'', section width (25mm) 0.98'', fitting rim diameter (40mm) 1.57''

454

Rear rims for wide tyres ,2 pieces, chromed, rim diameter app. (40mm) 1.57'' fitting tyres part no. 453

456

Front rims for wide tyres ,2 pieces, chromed, rim diameter app. (40mm) 1.57'' fitting tyres part no. 453

489

Tank, round, polished aluminium, incl. 2 tank straps fitting all prime movers except Peterbilt with sleeper. (83mm) 3.27" long, diameter (45mm) 1.77"

490

Tank round, polished aluminum, incl. 2 tank straps for Peterbilt with sleeper, (105mm) 4.13" long, diameter (45mm) 1.77"

508

Aluminium rim set "ALCOA" for front axle equipped with wide tyres, rim diameter (40mm) 1.57" , fitting tyres part no. 453

509

Aluminium rim set "ALCOA" for rear axle equipped with wide tyres rim diameter (40mm) 1.57" , fitting tyres part no. 453

510

Aluminium rim set "ALCOA" for standard tyres part no. 448 for front axle on prime movers, and for front and rear axles on low-loader units, incl. two double-sealed ball bearings. Also fitting the steerable tandem front axle part no. 110, rim diameter (40mm) 1.57"

511

Aluminium rim set "ALCOA" for drive axle tyres part no. 748 or 448 equipped with non-driven rear axle with twin tyres, incl. each two double-sealed ball bearings and suiting aluminium axle, rim diameter (40mm) 1.57"

512

Aluminium rim set "ALCOA" for drive axle tyres part no. 748 equipped with driven rear axles with twin tyres, suitable for differentials part nos. 117, 753, 754, 768 and 769, rim diameter (40mm) 1.57"

522

Aluminium rim set "ALCOA" for standard tyres part no. 448, driven front axle, rim diameter (40mm) 1.57"

523

Aluminium rim set "ALCOA" for wide tyres part no. 453,
driven front axle for Century class S/T cab, rim diameter (40mm) 1.57"

524

Aluminium long hole rim set for wide tyres part no. 453, driven front axle, rim diameter (40mm) 1.57"

525

Aluminium long hole rim set for wide tyres part no. 453, non-driven front axle, rim diameter (40mm) 1.57"

526

Aluminium long hole rim set for rear tyres part no. 748,
driven and non-driven rear axle equipped with twin tyres. Rim diameter 40 mm

527

Aluminium nut lock for long hole for rims part nos. 524 and 525

701

Aluminium front axle

702

Set of springs "NF" for professional chassis

703

Cable brackets for professional chassis

704

Square tank, high polished, (82x45x38,5mm) 3.23x1.77x1.52"

723

Servo installation kit 2 for operating servo on C.O.E. trucks using gearbox 165 fitting all professional chassis

745

rim, chromed, 2 pieces, for low loaders and tyres part no. 746 rim diameter (29mm) 1.14"

746

Low loaders tyres "Fulda-Multitonn 2 245/70, 2 pieces
wheel diameter (51mm) 2.01", width (15 mm) 0.59", for rim diameter of (29mm) 1.14"

747

rim, grey, 2 pieces, for low loaders and tyres part no. 746
rim diameter (29mm) 1.14"

748

Drive axle tyres "Fulda-Eceforce 315/80, 2 pieces
wheel diameter (73mm) 2.77", width (20mm) 0.79", for rim diameter of (40mm) 1.57"

2016

Widening of truck track for 2 rear axle

2017

Cardan joint (U-point) # 1 - steel with zinc plated surface, hardened, pair to connect gearbox # 765 and locking differential 3:1 and 2:1, using drive shaft # 152 or all trucks or Conventional trucks to connect gearbox # 765 and locking differential FRONT axle using 3:1 and 2:1, using drive shaft # 152 C.O.E. front axle

2018

Cardan joint (U-point) # 2 - see before but to connect both rear axle locking differentials with and without output, 3:1 and 2:1

2019

Cardan joint (U-point) # 3 - see before but for C.O.E. to connect gearbox # 765 and locking differentials FRONT axle 3:1 and 2:1